| |
| V96 series
Rising Plug Valves |
| |
 |
- Up to 6000psig (413 bar)
- Up to 121°C (250?)
- ss316
- KEL-F replaceable soft seat
- Stem seal below actuating threads
- Non-rotating globe pattern stem tip
- Straight-through roddable orifice for easy cleaning
- Pipe thread 1/4 -3/4 inch
|
 |
- Internal bonnet O-ring protects threads from external contamination
- Isolated threads located above sealing packing prevents media contamination and
thread lubricant washout
- Non-rotating Stem Tip for positive sealing and maximum soft seat life
- Replaceable seat design: DELRIN seat standard, optional PEEK and PFA
- Straight-through orifice, hence roddable for easy cleaning
|
| |
| |
| Material of Construction |
S316 Valve Pressure-Temperature Ratings |
| |
with standard Delrin seat |
| Component |
Material / ASTM Specification |
| Handle |
S316 / A276 |
| Wiper O-ring |
Fluorocarbon FKM |
| Bonnet |
S316 / A276 |
| Lock Nut |
S316 / A276 |
| Stem Shank |
S316 / A564 |
| Stem tip |
S316 / A276 |
| O-ring |
Fluorocarbon FKM |
| Backup Rings |
PTFE/D1710 |
| Seat |
DELRIN, optional PEEK, PFA |
| Body |
S316 / A479 |
|
Wetted components are listed in bold letters.
Lubrication: Fluorocarbon base on threads, silicone base on soft parts |
|
| Temperature, F(C) |
Temperature, F(C) |
-65 to 100 ( -53 to 37 )
200 ( 93 )
250 ( 121) |
6000 psig (413 bar)
2650 psig (182 bar)
1000 psig (68.9 bar ) |
|
| |
| Optional Stem O-ring |
| Temperature, F(C) |
Temperature, F(C) |
Temperature, F(C) |
| Buna-N |
BN |
-28 to 121 (-20 to 250) |
| EPDM |
EP |
| Kalrez |
KZ |
-28 to 204 (-20 to 400 ) |
|
| |
Factory Test
Every valve is factory tested with the nitrogen @ 1000 psig (68 bar) for leakage at the seat to a maximum allowable leak rate of 0.1 scc/min. Stem seals are tested to a requirement of no detectable leakage using a liquid leak detector.. |
| |
|
|
| |
| Technical Data |
| Ratings are based on valves with fluorocarbon FKM O-rings and PTFE backup rings. |
Valve
Material |
Seat Material |
Valve Temperature
Rating, F(C) |
Pressure Rating at
100F(37C), psig (bar) |
Pressure Rating at400F(204C), psig (bar) |
| Matel rial |
Designator |
| S316 |
Standard DELRIN |
DL |
-20 to 250
(-28 to 121) |
6000 (413) |
N/A |
| Optional PEEK |
PK |
-20 to 400
(-28 to 204) |
1000 (68.9) |
| Optional TFE PFA |
PA |
750 (52) |
100 (6.8) |
|
| |
| Table Dimensions, mm(in.) |
Ordering
Number |
End Connections |
Orifice
mm(in.) |
Cv |
Dimensions, mm(in.) |
| Inlet |
Outlet |
L |
L1 |
L2 |
H |
| V96A |
F-
4N |
1/4" Female NPT |
4.8
(-0.187) |
0.63 |
56.9 (2.24) |
28.4 (1.12) |
28.4 (1.12) |
95.8 (3.77) |
| MF-4N |
1/4" Male NPT |
1/4" Female NPT |
73.4 (2.90) |
45.2 (1.78) |
| MF-8N4N |
1/2" Male NPT |
1/4" Female NPT |
76.5 (3.01) |
48.0 (1.89) |
| V96A-G4-* |
F-4N |
1/4" Female NPT |
72.9 (2.87) |
28.4 (1.12) |
44.4 (1.75) |
| MF-8N4N |
1/2" Male NPT |
1/4" Female NPT |
124 (4.87) |
79.2 (3.12) |
| V96B- |
F-8N |
1/2" Female NPT |
6.4
(-0.25) |
1.8 |
67.6 (2.66) |
33.8 (1.33) |
33.8 (1.33 |
97.3 (3.83) |
| MF-8N |
1/2" Male NPT |
1/2" Female NPT |
88.6 (3.49) |
54.9 (2.16) |
| MF-12N8N |
3/4" Male NPT |
1/2" Female NPT |
| V96B-G8-* |
F-8N |
1/2" Female NPT |
90.9 (3.58) |
33.8 (1.33) |
57.2 (2.25) |
| MF-8N |
1/2" Male NPT |
1/2" Female NPT |
142 (5.58) |
84.6 (3.33) |
| MF-12N8N |
3/4" Male NPT |
1/2" Female NPT |
|
All dimensions shown are for reference only and are subject to change.
*- G4- for 1/4 Female NPT gage ports, and -G8- for 1/2 Female NPT gage ports.
* Gage port models with extended body allowing 50.8mm(2.0 ) pipe insulation are listed in bold letter |
| |
