Electra Solutions

Features:
1. 'Y' Type Construction for ON/OFF application having self - cleaning features
2. Best choice for speedy and multiple operations
3. Due to Angle shape, easy to mount at congested place.
4. Due to Angle seated body, Insensitive to the contaminated fluids.
5. Full flow with negligible pressure drop.

Types : 1.Normally Close (Energised To Open) 2.Normally Open (Energised To Close)

Size Range: 1/4" To 4" Screwed /Flanged / Triclover

Accessories: 3/2 Way Solenoid Valve, Pilot Valve, on/off limit switch, Filter Regulator, Moisture Separator Quick Exhaust Valve are available on request.

Actuator
Body Cover Flange Spring Port Connection Operating Pressure Position Indicator Operating Cylces Media	: S/S 304 Pressed / Aluminium Die-Cast : Aluminium Pressure Die-Cast (Anodised) : Spring Steel (IS 4454 Gr. III) : 1/4" BSP NPT (on request) : 3.5 To 7 Bar : Nylon : 350 To 650 Cycles/Hr : Dry Lubricated Air / Innert Gases Hydint Moisture Separators are advised to use in line
Valve
Size Body Stem Packing Trim Spindle Seat Gland Packing Body Test Pressure End Connections Working Fluid Press Leakage Operating Temp	: 1/4" to 4" Screwed / Flanged / Triclover : ASTM A 35I Gr.CF8 / CF8M : PTFE upto 180°C, Self-compensating (spring loaded) : Stainless Steel 304 / 316 : Soft seat (Optional EPDM, Buna Nitrile, Viton) : ATeflon 'V' seals, backed by graphite wiper seal self compensating] : 24 Bar Maximum : Female Screwed to BSP or NPT / Flanged / Triclover : Refer to table : Drop tight / bubble tight, class IV ANSI B 16.104, 1976 : On steam - Continuous 155° C, Intermittent 180°C Maximum (High Temp. above 180°C - On Request)

Technical Specification :

DIMENSION:(All Dimension are in mm)

sitemap