elc-pne-linearpositionerelc-pne-linearpositioner
Electro Pneumatic Positioner

Product Category

Electro Pneumatic Positioner

Share to:

                                 

Electra-Pneumatic Positioner Linear Type

T AEP - 1000 - L
"Aira" offers Electra-Pneumatic Positioners [4-20 m Amp, linear and rotary type] are advanced control devices that provide unparalleled stability in difficult environments.

Specification: 

Type AEP-1000-L
Linear Type (Lever Feedback)
Item Single Acting Double Acting
Input Signal 4~20mA DC (NOTE 1)
Input Resistance 235 ± 15Ω
Supply Air Pressure 20~100 psi  (7.0 kg/cm2)
Standard Stroke 10-80mm (NOTE 2)
Air piping Connection G¼" (NPT) (F)
Conduit Connection G½" (NPT) (F)
Explosion-proof Classification Exia IIBT6, Exdm IIBT6, Exdm IIcT6
Degree of Protection IP 66
Ambient Temperature -20°C to 70°C
Pressure Gauge Stainless Steel 0-2 Kg/cm
0-4 Kg/cm2
0-10 Kg/cm2
Output Characteristics Linear
Linearity Within ± 1.0% F.S.
Sensitivity Within 0.2% F.S.
Hysteresis Within 0.75% F.S.
Repeatability Within ± 0.5% F.S.
Air Consumption 5.0 LPM  Supply (1.4 kg/cm2)
Flow Capacity 80 LPM Supply (1.4 kg/cm2)
Material Aluminum Diecast Body
Weight 2.8 Kg. With a Terminal Box

 

Features

  • Designed as a block-build structure for maintenance and repair.
  • Precise calibration with simple SPAN and ZERO adjustments.
  • Simple conversion to Direct Acting or Reverse Acting.
  • Split range control is available by simple adjustments without changing parts.
  • Simple structure for feedback connection.
  • Corrosion-resistant aluminum diecast body.
  • Sensitive response for high performance.
  • Vibration-resistant design.
  • Stainless steel gauges standard.
  • A restricted pilot valve orifice kit for small actuators is included.
  • Optional built-in limit switches or 4-20 mA position transmitter for feedback.
  • Optional directly mountable positioner.
  • Proved the reliability through over 5,00,000 times of repeat tests & Vibration tests.

Electra-Pneumatic Positioner Rotary Type
AEP - 1000 - R
"Aira" Electra-Pneumatic Positioners [4-20 m Amp, linear and rotary type] are advanced control devices that provide unparalleled stability in difficult environments

Features

  • SPAN and ZERO adjustments.
  • Simple conversion to Direct Acting or Reverse Acting.
  • Split range control is available by simple adjustments without changing parts.
  • Simple structure for feedback connection.
  • Corrosion-resistant aluminum diecast body.
  • Sensitive response for high performance.
  • Vibration-resistant design.
  • Stainless steel gauges standard.
  • A restricted pilot valve orifice kit for small actuators is included.
  • Optional built-in limit switches or 4-20 mA position transmitter for feedback.
  • Optional directly mountable positioner.
  • Proved the reliability through over 5,00,000 times of repeat tests & Vibration test